48kW TDI Power WCL488 Series Water Cooled Electronic Load Bank

48kW TDI Water Cooled Load Bank


  • Used
  • WCL488 400VDC 12kW Master Load Bank
  • Rack for WCL488 DC Load Bank
  • WCS488 400VDC 12kW Slave Load Bank
  • WCS488 400VDC 12kW Slave Load Bank
  • WCS488 400VDC 12kW Slave Load Bank
  • Shipping Dimensions: 29″ Long x 44″ Width x 72″ Height and 806 lbs.

 

  • The WCL488 Water Cooled Electronic Loads are ideal for high current/high power battery, power supply and fuel cell testing. Standard systems from 12kW to 120kW are configured using 12kW standard products in a master/slave configuration. Each 12kW unit is rated at 0-100V or 0- 400V, 0-1000A (1200A for the 50V model), not to exceed 12,000W. Larger systems are available upon request.
  • The WCL488 master unit measures 5-1/4 inches high and the slave unit measures 3-1/2 inches high and both fit into a standard 19-inch wide equipment rack. The compact size of the units and our unique plumbing design allows 120kW of power dissipation in a single 60 high rack.
  • Systems may be upgraded by adding slave units. The manifold plumbing design and complete DC bus structure allow for simple upgrade in the field.
  • Individual units’ electrical inputs and water inlet and output connections are located on the rear of each unit. Single connections are provided for systems unless otherwise specified.
  • Operation below 1 Volt at 10,000 Amps (50 Volt model only)
  • Five modes of operation: Constant Current, Constant Resistance, Constant Power, Constant Voltage, Pulse Mode
  • Full Scale Range Switching: When a scale is selected, it changes the controls and instrumentation to correspond with the selected scale, for increased resolution and accuracy.
  • Synchronized paralleling creates larger systems controlled as a single unit
  • Automated flow regulation to eliminate condensation
  • Lab View drivers are available for computer control
  • Self configuring based on number of slaves in use
  • WCL488 Dimensions: 19 inches W x 5.22 inches H x 24 inches D