Dimensions: 8″ Long x 6″ Wide x 2 1/4″ High and weighs 1 Lb. and 10 Oz.
The 327-1513-02 control board has been discontinued and replaced with the 327-1513-01. The main difference between the boards is the 0327-1513-01 no longer has the K7 starter relay and the K8 fuel relay mounted on the board. When replacing a 0327-1513-02 board with a 0327-1513-01 board, two DC relays need to be added to the harness to replace the K7 and K8 relays. Since no revision has been made to the harness, these relays must be fitted to the harness by removing the corresponding wires from the connector and manually wiring the relays using spade terminals.
Starter Relay (K7): To install the starter relay, the ground-side if the relay coil must be connected to J11-21 and the postive-side connected to Relay Coil B+
Fuel Shut Off Relay (K8): To install the Fuel Shutoff Relay, the ground-side of the coil must be connected to J11-22 and the positive-side connected to Relay Coil B+
Recommended Parts List for the relay would include: (2) Relays – 0307-2968-03 (12V) or 0307-2968-04 (24V)
